A statistical approach to characterize the viscoelastic creep compliances of a vinyl ester polymer

The objective of this study was to develop a model to predict the viscoelastic material functions of a vinyl ester (VE) polymer with variations in its experimentally obtained material properties under combined isothermal and mechanical loading. Short-term tensile creep experiments were conducted at three temperatures below the glass transition temperature of the VE polymer, with 10 replicates for each test configuration. The measured creep strain versus time responses were used to determine the creep compliances using the generalized viscoelastic constitutive equation with a Prony series representation. The variation in the creep compliances of a VE polymer was described by formulating the probability density functions (PDFs) and the corresponding cumulative distribution functions (CDFs) of the creep compliances using a two-parameter Weibull distribution. Both Weibull scale and shape parameters of the creep compliance distributions were shown to be time and temperature dependent. Two-dimensional quadratic Lagrange interpolation functions were used to characterize the Weibull parameters to obtain the PDFs and, subsequently, the CDFs of the creep compliances for the complete design temperature range during steady state creep. At each test temperature, creep compliance curves were obtained for constant CDF values and compared with the experimental data. The predicted creep compliances of the selected VE polymer in the design space are in good agreement with the experimental data for all three test temperatures.     

Ti-MWW分子筛吸附H2O和NH3的结构和振动光谱的密度泛函理论计算

Ti-MWW分子筛具有10元环(10MR)孔道体系和12MR超笼以及外表面杯状空穴,在以H2O2水溶液为氧化剂的催化氧化反应中表现出不同于其他钛硅分子筛的特殊溶剂效应和立体选择性.已有的实验和密度泛函理论(DFT)计算研究表明,骨架Ti(IV)可能分布在10MR孔道和12MR超笼中.最近,我们采用DFT计算研究了Ti-MWW分子筛中骨架钛落位,通过比较Ti/Si替代能和红外振动光谱,提出Ti(IV)最可能落位在T1和T3位,并以[Ti(OSi)4]形态存在,显示960 cm–1钛特征振动峰.[Ti(OSi)4]物种水解时Ti–O键发生选择性断裂,生成具有翻转Ti–OH的[Ti(OSi)3OH]物种.由于Ti中心具有Lewis酸性,与配体分子络合后使Ti(IV)的配位状态改变. Ti-MWW分子筛中不同的骨架Ti(IV)落位和形态可能呈现不同的催化选择性.本文应用DFT研究了Ti-MWW分子筛中T1和T3位上不同钛物种与H2O和NH3的吸附作用,考察了其几何结构、吸附能以及红外振动光谱性质,为深入理解骨架Ti(IV)的微观结构及实验红外光谱表征提供参考数据.计算采用36T簇模型,从MWW分子筛晶体结构中分别以T1和T3为中心截取七层骨架原子,末端设为Si–H键并固定为1.46?.结构优化时松弛内部四层骨架原子并固定最外三层骨架原子.所有计算在B3LYP/6-31G(d,p)理论水平完成,计算的吸附能都经过BSSE校正,计算的频率以约化因子0.961校正.所有计算在Gaussian 09软件包完成.计算结果表明,四配位的[Ti(OSi)4]和[Ti(OSi)3OH]物种都能与H2O或NH3分子作用生成三角双锥的五配位络合物. H2O或NH3分子有选择性地进攻Ti–O键的Ti端,形成近乎直线的L–Ti–O键, L–Ti距离可达2.2–2.4?. T1位钛物种的Lewis酸性比T3位的略高.对于[Ti(OSi)3OH]物种, Ti–OH的存在使得Ti(IV)的酸性大大增强,表现出很强的吸附作用.此外,[Ti(OSi)3OH]物种也能通过Ti–OH基团与H2O和NH3形成氢键络合物,但是其吸附能比形成配位络合物的能量更小,说明配体分子更趋向于吸附在Ti中心形成配位络合物.自然键轨道分析表明, Ti(IV)中心的Lewis酸性归因于Ti的空4p轨道接受配体提供的孤对电子,并且属于LUMO+3.所有吸附络合物的特征振动频率分布在两个区域,即钛特征振动区域和羟基振动区域. T1和T3位的[Ti(OSi)4]物种的钛特征振动频率都在960 cm–1,与H2O形成五配位的吸附络合物之后,钛特征振动频率位移到970 cm–1.[Ti(OSi)3OH]物种的钛特征振动频率分别为990 cm–1(T1位)和970 cm–1(T3位),吸附H2O分子后都位移到980 cm–1.相应的NH3吸附络合物的钛特征振动峰频率都高出5 cm–1.分析表明,钛特征振动模式归属于Ti–O–Si键的不对称伸缩振动的协同振动.在羟基伸缩振动区域,气相H2O、末端Si–OH基团以及Ti–OH基团的羟基伸缩振动在3600–3760 cm–1.吸附H2O后,羟基伸缩振动移到3460–3150 cm–1区域.[Ti(OSi)3OH]物种与NH3和H2O形成氢键络合物后,钛羟基的伸缩振动频率分别红移500和1100 cm–1,出现在2700和3200 cm–1区域.吸附分子的O–H和N–H的伸缩振动频率略微蓝移,这反映了Ti物种具有Lewis酸性.     

ABX3型钙钛矿光伏材料的结构与性质调控

近年来,钙钛矿太阳能电池由于其效率高、制造成本低、工艺简单等特点受到广泛关注,成为目前太阳能电池领域的研究热点。在钙钛矿太阳能电池中,无机-有机杂化ABX₃材料非常重要。它既作为光吸收材料,同时又作为载流子传输材料,因此它的光电性质直接影响到太阳能电池的效率。本文综述了调控无机有机金属卤化物ABX₃型钙钛矿光伏材料结构和性质的几种途径。     

Role of refractive index in sum frequency generation intensity of salt solution interfaces

Sum frequency generation spectroscopy (SFG) has been widely used to study the interfacial chemistry of aqueous salt solutions of biological or environmental importance. Most of the SFG data analysis used the same bulk refractive index for different salt concentrations despite of the variations of the refractive indices. Here we systematically investigate the influence of the refractive index on the SFG intensities at various experimental conditions. It is discovered that the SFG intensities are the most sensitive to the refractive index at solid/liquid interfaces nearby the total internal reflection geometries. At air/liquid interfaces, the effect of the refractive indices is also nonegligible. Consequently some important SFG results, such as the response of water structures to the ionic strength at the SiO₂/aqueous interfaces, are necessary to be reevaluated. These conclusions on the effect of the small variations of the refractive index are generally useful for the common practice of SFG data analysis.     

基于精确质量数筛选的超高效液相色谱-线性离子阱/静电场轨道阱质谱法快速鉴别化妆品中的邻苯二甲酸酯

采用超高效液相色谱-线性离子阱/静电场轨道阱组合式高分辨质谱联用(UPLC-LTQ Orbitrap MS),结合邻苯二甲酸酯(PAEs)精确质量数,建立了快速筛选、定性识别化妆品中PAEs的分析方法。不同种类的化妆品样品经甲醇提取,Waters ACQUITY UPLC BEH C18色谱柱(100×2.1mm,1.7μm)分离,以乙腈-水(含5mmol/L乙酸铵和0.1%甲酸)为流动相梯度洗脱。通过UPLC-LTQ/Orbitrap MS的正离子模式全扫描分析,获得提取物中PAEs化合物母离子和主要碎片离子精确质量数,实现对化妆品的快速筛选。以保留时间和数据依赖扫描(Data Dependent Scan)模式获得的子离子质谱图进行定性确证。所发展的UPLC-LTQ Orbitrap MS方法分离度高、灵敏度好,所考察的14种常见PAEs的精确质量数相对偏差小于5.0×10-6,线性良好,相关系数大于0.99,14种PAEs的检出限在0.05~0.5mg/kg范围内,能满足化妆品实际样品的分析要求。对50种化妆品实际样品进行筛选,结果良好,说明该方法是化妆品中PAEs快速筛选、定性识别的有效方法。     

Graphene Liquid Marbles as Photothermal Miniature Reactors for Reaction Kinetics Modulation

We demonstrate the fabrication of graphene liquid marbles as photothermal miniature reactors with precise temperature control for reaction kinetics modulation. Graphene liquid marbles show rapid and highly reproducible photothermal behavior while maintaining their excellent mechanical robustness. By tuning the applied laser power, swift regulation of graphene liquid marble’s surface temperature between 21–135 °C and its encapsulated water temperature between 21–74 °C are demonstrated. The temperature regulation modulates the reaction kinetics in our graphene liquid marble, achieving a 12‐fold superior reaction rate constant for methylene blue degradation than at room temperature.     

Torsion of Thin Tubes With Multicell Cross‐Section

It is known that the classical technical theories of Bredt and of sectorial areas are the variational limit of the SaintVenant torsion problem for hollow homogeneous isotropic cylinders with thin doubly connected crosssection when the wall thickness reaches zero. The main goal of this paper is to prove that the same result remains true for thin tubes with multicell crosssection.Sommario. E noto che le classiche teorie tecniche di Bredt e delle aree settoriali sono il limite variazionale del problema della torsione alla De SaintVenant per cilindri lunghi con sezione cava biconnessa quando lo spessore della parete tende a zero. In questo lavoro si estende il risultato alle sezioni multiconnesse con ordine di connessione qualsiasi.     

A new phenomenon of acoustic streaming

This paper describes a new phenomenon of acoustic streaming which takes place when a Helmholtz resonator is excited by an inside sound source with resonant frequency, and takes the form of a strong turbulent jet. The flow visualizations, hot wire and LDV measurements are combined to investigate the process of acoustic streaming. It is found that this kind of acoustic streaming results from the contribution of Reynolds stress.     

A centrally cracked thin circular disk, Part I: 3D Elastic–plastic finite element analysis

A full field solution, based on small deformation, three-dimensional elastic–plastic finite element analysis of the centrally cracked thin disk under mode I loading has been performed. The solution for the stresses under small-scale yielding and lo!cally fully plastic state has been compared with the HRR plane stress solution. At the outside of the 3D zone, within a distance of rσ_o/J=18, HRR dominance is maintained in the presence of a significant amount of compressive stress along the crack flanks. Ahead of this region, the HRR field overestimate the stresses. These results demonstrate a completely reversed state of stress in the near crack front compared to that in the plane strain case. The combined effect of geometry and finite thickness of the specimen on elastic–plastic crack tip stress field has been explored. To the best of our knowledge, such an attempt in the published literature has not been made yet. For the qualitative assessment of the results some of the field parameters have been compared to the available experimental results of K, gives a fair estimate of the crack opening stress near the crack front at a distance of order 10⁻² in. On the basis of this analysis, the Linear Elastic Fracture Mechanics approach has been adopted in analyzing the fatigue crack extension experiments performed in the disk (Part II).